Mobile Lab: Difference between revisions

From aesr-Docs
Jump to navigationJump to search
← Older edit
No edit summary
Karl (talk | contribs)
110 edits
 
(71 intermediate revisions by 3 users not shown)
Line 10: Line 10:
* 3x DAP Audio QI-4400 4 Channel Amplifier
* 3x DAP Audio QI-4400 4 Channel Amplifier
* 2x DLINK DGS-1210-28 Smart Managed Switch
* 2x DLINK DGS-1210-28 Smart Managed Switch
=== Dimensions ===
* Length (total):7890 mm
* Length (without drawbar): 6260 mm
* Drawbar: 1630 mm
* Width: 2550 mm
* Height: 3055 mm
* Weight: 3200 kg


=== Ressources ===
=== Ressources ===
* Blockdiagramm Routing Moblie Lab [[File: X052BSB V0.pdf]]
* [https://base.uni-ak.ac.at/cloud/index.php/s/478iC7aTZB3M4x3 Mobile Lab Base Ressources]
* Blockdiagram Routing Mobile Lab [[Media: X052BSB V0.pdf]]
* Dimensions and Floorplan [[Media: Laborwagen Model.pdf]]
* Manual TF1 [[Media: Tf5-manual.pdf]]


== Mixer Routing ==
== Mixer Routing ==
The mixer can either be accesed via USB (32 channel plug-and-play) or via [https://www.getdante.com/ Dante]. Dante requires a compatible soundcard or [https://www.getdante.com/products/software-essentials/dante-virtual-soundcard/ Dante Virtual Soundcard](we can provide a shareable license). AUX Channels are used in the mixing console to route the audio to the corresponding physical outputs. You can see the output routing on the following channel list.
{| class="wikitable"
|+ USB Mixer Routing
|-
! ASF !! Channel Name !! Output
|-
| ABH LH  || AUX 13  || Omni 11 / MPO 11 
|-
| ABH RH || AUX 14  || Omni 12 / MPO 12 
|-
| ABH LV    || Stereo ST L  || Omni 13 / MPO 13 
|-
| ABH RV  || Stereo ST R  || Omni 14 / MPO 14 
|-
|  PA 1    || AUX 1  || Omni 1 / MPO 1   
|-
| PA 2    || AUX 2  || Omni 2 / MPO 2 
|-
| PA 3  || AUX 3  || Omni 3 / MPO 3   
|-
| PA 4  || AUX 4  || Omni 4 / MPO 4   
|-
| PA 5  || AUX 5  || Omni 5 / MPO 5 
|-
| PA 6    || AUX 6  || Omni 6 / MPO 6   
|-
|  PA 7 || AUX 7  || Omni 7 / MPO 7 
|-
| PA 8  || AUX 8  || Omni 8 / MPO 8   
|-
| PAA    || AUX 9  || Omni 9 / MPO 9   
|-
| PAB || AUX 10  || Omni 10 / MPO 10 
|-
| PAL || AUX 11 || Omni 15 / MPO 15 
|-
| PAR || AUX 12  || Omni 16 / MPO 16 
|-
|}
== Speaker Setup Innen ==
Basic Ambisonic Template for 4 channel mixing can be found here:
* [https://base.uni-ak.ac.at/cloud/index.php/s/g8zeiwG7gfan4cr Reaper Ambisonics Template]
* [https://base.uni-ak.ac.at/cloud/index.php/s/njqdN4KpPeCgdFd Ambisonics Decoder Mobile Lab]
Load Preset A05 - AESR Rec for 4 channel mixdowns
{| class="wikitable"
|+ Speaker Setup Inside
|-
! Lautsprecher !! Azimuth !! Azimuth Elevation !! Output
|-
|ABH LV || -30° || 0°|| Omni 13
|-
|ABH RV || 30° || 0°|| Omni 14
|-
|ABH RH || 130 || 0°|| Omni 11
|-
|ABH LH || -130° || 0°|| Omni 12
|-
|}
== Working with the Mobile Lab ==
The center piece for routing sound inside the Mobile Lab is a Yamaha TF1 digital mixing console.
Different presets are already prepared for different routing options for different scenarios including:
* Multichannel Output
* Quadrophonic Mixdowns
* Recording
Depending on the preset routing will be different and you actually dont need to further interact with the mixing console beside loading the corresponding preset.
See the channel list of each preset where you need to sound audio to get output.
<span id="presets"></span>
== Presets ==
Presets can be loaded from the Scenes Menu on the TF1 in the top left corner
[[File:Presets.jpg| 600 px]]
<span id="aesr-usbdante"></span>
==== AESR USB|Dante: ====
* Channel 1 - 12 USB
* Channels 17-28 Dante
* DCA 1 acts like a masterfader for all USB &amp; Dante channels
* Purpose: Multichannel Routing
* All USB channel are also sent to ABH LV/RV. Note that everything will be presented in mono


{| class="wikitable"
{| class="wikitable"
|+ Mixer Routing
|-
|-
! Input CH !! Channel Mixer !! Out !! ASF !! VCA Group
! Input
! Mixer Channel
! Channel Name
! Output
! ASF
! DCA Group
|-
| USB 1
| Ch 1
| PA1(USB)
| Omni 1/MPO 1
| PA1
| DCA 1
|-
| USB 2
| Ch 2
| PA2(USB)
| Omni 2/MPO 2
| PA2
| DCA 1
|-
| USB 3
| Ch 3
| PA3(USB)
| Omni 3/MPO 3
| PA3
| DCA 1
|-
| USB 4
| Ch 4
| PA4(USB)
| Omni 4/MPO 4
| PA4
| DCA 1
|-
| USB 5
| Ch 5
| PA5(USB)
| Omni 5/MPO 5
| PA5
| DCA 1
|-
| USB 6
| Ch 6
| PA6(USB)
| Omni 6/MPO 6
| PA6
| DCA 1
|-
| USB 7
| Ch 7
| PA7(USB)
| Omni 7/MPO 7
| PA7
| DCA 1
|-
| USB 8
| Ch 8
| PA8(USB)
| Omni 8/MPO 8
| PA8
| DCA 1
|-
| USB 9
| Ch 9
| PAA(USB)
| Omni 9/MPO 9
| PAA
| DCA 1
|-
| USB 10
| Ch 10
| PAB(USB)
| Omni 10/MPO 10
| PAB
| DCA 1
|-
| USB 11
| Ch 11
| PAL(USB)
| Omni 11/MPO 11
| PAL
| DCA 1
|-
| USB 12
| Ch 12
| PAR(USB)
| Omni 12/MPO 12
| PAR
| DCA 1
|-
| Dante 17
| Ch 17
| PA1(DA)
| Omni 1/MPO 1
| PA1
| DCA 1
|-
| Dante 18
| Ch 18
| PA2(DA)
| Omni 2/MPO 2
| PA2
| DCA 1
|-
|-
| CH 11  / USB 11  || AUX 11  || Omni 11 / MPO 11  || ABH LH  || DCA 1
| Dante 19
| Ch 19
| PA3(DA)
| Omni 3/MPO 3
| PA3
| DCA 1
|-
|-
| CH 13  / USB 13  || AUX 13  || Omni 13 / MPO 9  || ABH LV  || DCA 1
| Dante 20
| Ch 20
| PA4(DA)
| Omni 4/MPO 4
| PA4
| DCA 1
|-
|-
| CH 14  / USB 14  || AUX 14  || Omni 14 / MPO 10  || ABH RV  || DCA 1
| Dante 21
| Ch 21
| PA5(DA)
| Omni 5/MPO 5
| PA5
| DCA 1
|-
|-
| CH 12  / USB 12  || AUX 12  || Omni 12 / MPO 12  || ABH RH  || DCA 1
| Dante 22
| Ch 22
| PA6(DA)
| Omni 6/MPO 6
| PA6
| DCA 1
|-
|-
| CH 1  / USB 1  || AUX 1  || Omni 1 / MPO 1    || PA 1    || DCA 1
| Dante 23
| Ch 23
| PA7(DA)
| Omni 7/MPO 7
| PA7
| DCA 1
|-
|-
| CH 2  / USB 2  || AUX 2  || Omni 2 / MPO 2    || PA 2    || DCA 1
| Dante 24
| Ch 24
| PA8(DA)
| Omni 8/MPO 8
| PA8
| DCA 1
|-
|-
| CH 3  / USB 3  || AUX 3  || Omni 3 / MPO 3    || PA 3    || DCA 1
| Dante 25
| Ch 25
| PAA(DA)
| Omni 9/MPO 9
| PAA
| DCA 1
|-
|-
| CH 4  / USB 4  || AUX 4  || Omni 4 / MPO 4    || PA 4    || DCA 1
| Dante 26
| Ch 26
| PAB(DA)
| Omni 10/MPO 10
| PAB
| DCA 1
|-
|-
| CH 5  / USB 5  || AUX 5  || Omni 5 / MPO 5    || PA 5    || DCA 1
| Dante 27
| Ch 27
| PAL(DA)
| Omni 11/MPO 11
| PAL
| DCA 1
|-
|-
| CH 6  / USB 6  || AUX 6  || Omni 6 / MPO 6    || PA 6    || DCA 1
| Dante 28
| Ch 28
| PAR(DA)
| Omni 12/MPO 12
| PAR
| DCA 1
|}
 
<span id="aesr-danteusb"></span>
 
==== AESR Dante|USB ====
 
* Same as above but Dante Channels are switched around from: Dante 1-12, USB 17-28 #### AESR USB|Analog
* Setup for using analog inputs for routing, suitable for setup using other soundcards than the TF1
* Channels 1-12 USB In
* Channels 17-28 Analog Ins (AN 1-12)
 
{| class="wikitable"
|-
|-
| CH 7  / USB 7  || AUX 7  || Omni 7 / MPO 7    || PA 7    || DCA 1 
! Input
! Mixer Channel
! Channel Name
! Output
! ASF
! DCA Group
|-
|-
| CH 8  / USB 8  || AUX 8  || Omni 8 / MPO 8    || PA 8    || DCA 1
| USB 1
| Ch 1
| PA1(USB)
| Omni 1/MPO 1
| PA1
| DCA 1
|-
|-
| CH 9  / USB 9  || AUX 9  || Omni 9 / MPO 9    || PAA    || DCA 1
| USB 2
| Ch 2
| PA2(USB)
| Omni 2/MPO 2
| PA2
| DCA 1
|-
|-
| CH 10  / USB 10  || AUX 10  || Omni 10 / MPO 10  || PAB    || DCA 1
| USB 3
| Ch 3
| PA3(USB)
| Omni 3/MPO 3
| PA3
| DCA 1
|-
|-
| CH 17  / DANTE 17  || AUX 1  || Omni 1 / MPO 1  || PA 1   || DCA 2 
| USB 4
| Ch 4
| PA4(USB)
| Omni 4/MPO 4
| PA4
| DCA 1
|-
|-
| CH 18  / DANTE 18  || AUX 2  || Omni 2 / MPO 2  || PA 2    || DCA 2 
| USB 5
| Ch 5
| PA5(USB)
| Omni 5/MPO 5
| PA5
| DCA 1
|-
|-
| CH 19  / DANTE 19  || AUX 3  || Omni 3 / MPO 3  || PA 3    || DCA 2 
| USB 6
| Ch 6
| PA6(USB)
| Omni 6/MPO 6
| PA6
| DCA 1
|-
|-
| CH 20  / DANTE 20  || AUX 4  || Omni 4 / MPO 4  || PA 4    || DCA 2 
| USB 7
| Ch 7
| PA7(USB)
| Omni 7/MPO 7
| PA7
| DCA 1
|-
|-
| CH 21  / DANTE 21  || AUX 5  || Omni 5 / MPO 5  || PA 5    || DCA 2 
| USB 8
| Ch 8
| PA8(USB)
| Omni 8/MPO 8
| PA8
| DCA 1
|-
|-
| CH 22  / DANTE 22  || AUX 6  || Omni 6 / MPO 6  || PA 6    || DCA 2 
| USB 9
| Ch 9
| PAA(USB)
| Omni 9/MPO 9
| PAA
| DCA 1
|-
|-
| CH 23  / DANTE 23  || AUX 7  || Omni 7 / MPO 7  || PA 7    || DCA 2 
| USB 10
| Ch 10
| PAB(USB)
| Omni 10/MPO 10
| PAB
| DCA 1
|-
|-
| CH 24  / DANTE 24  || AUX 8  || Omni 8 / MPO 8  || PA 8    || DCA 2 
| USB 11
| Ch 11
| PAL(USB)
| Omni 11/MPO 11
| PAL
| DCA 1
|-
|-
| CH 25  / DANTE 25  || AUX 9  || Omni 9 / MPO 9  || PAA    || DCA 2 
| USB 12
| Ch 12
| PAR(USB)
| Omni 12/MPO 12
| PAR
| DCA 1
|-
|-
| CH 26  / DANTE 26  || AUX 10 || Omni 10 / MPO 10 || PAB    || DCA 2 
| Analog 1
| Ch 17
| PA1(AN)
| Omni 1/MPO 1
| PA1
| DCA 1
|-
|-
| CH 27  / DANTE 27  || AUX 11 || Omni 7 / MPO 7  || ABH LH  || DCA 2 
| Analog 2
| Ch 18
| PA2(AN)
| Omni 2/MPO 2
| PA2
| DCA 1
|-
|-
| CH 28  / DANTE 28  || AUX 12 || Omni 8 / MPO 8  || ABH RH  || DCA 2 
| Analog 3
| Ch 19
| PA3(AN)
| Omni 3/MPO 3
| PA3
| DCA 1
|-
|-
| CH 29  / DANTE 29  || AUX 13 || Omni 9 / MPO 9  || ABH LV  || DCA 2 
| Analog 4
| Ch 20
| PA4(AN)
| Omni 4/MPO 4
| PA4
| DCA 1
|-
|-
| CH 30  / DANTE 30  || AUX 14 || Omni 10 / MPO 10 || ABH RV  || DCA 2 
| Analog 5
| Ch 21
| PA5(AN)
| Omni 5/MPO 5
| PA5
| DCA 1
|-
|-
| Analog 6
| Ch 22
| PA6(AN)
| Omni 6/MPO 6
| PA6
| DCA 1
|-
| Analog 7
| Ch 23
| PA7(AN)
| Omni 7/MPO 7
| PA7
| DCA 1
|-
| Analog 8
| Ch 24
| PA8(AN)
| Omni 8/MPO 8
| PA8
| DCA 1
|-
| Analog 9
| Ch 25
| PAA(AN)
| Omni 9/MPO 9
| PAA
| DCA 1
|-
| Analog 10
| Ch 26
| PAB(AN)
| Omni 10/MPO 10
| PAB
| DCA 1
|-
| Analog 11
| Ch 27
| PAL(AN)
| Omni 11/MPO 11
| PAL
| DCA 1
|-
| Analog 12
| Ch 28
| PAR(AN)
| Omni 12/MPO 12
| PAR
| DCA 1
|}
|}


== Speaker Setup Innen ==
<span id="aesr-rec"></span>
 
==== AESR Rec ====


* For recording and 4 channel monitoring
* DCA 1 Computer Monitor
* DCA 2 Input Monitoring
* Direct Input Monitoring
* Recording Inputs will be available Starting at Channel 17 (Analog In = USB 17 In)


{| class="wikitable"
{| class="wikitable"
|+ Speaker Setup Inside
|-
|-
! Lautsprecher !! Azimuth !! Azimuth Elevation !! Mixer Channel (Dante) !! Mixer Channel (USB)
! Input
! Mixer Channel
! Channel Name
! Output
! ASF
! DCA Group
|-
| USB 1
| Ch 1
| PC L
| Omni 13MPO 13
| ABH LV
| DCA 1
|-
| USB 2
| Ch 2
| PC R
| Omni 14/MPO 14
| ABH RV
| DCA 1
|-
| USB 3
| Ch 3
| PC LH
| Omni 11/MPO 11
| ABH LH
| DCA 1
|-
| USB 4
| Ch 4
| PC RH
| Omni 12/MPO 12
| ABH RH
| DCA 1
|}
 
 
=== Reaper ===
[[File: ReaperTemplate.png|1000px]]
 
The AESR Lab provides a ready made Reaper-Template that can pan 8 soundsources to any speaker attached to the mobile lab. You can find it [https://base.uni-ak.ac.at/cloud/index.php/s/BiTfc4xXaEGPeLt here].
 
If you are looking for a way create your own multichannel routing template, or modify the existing one, we have created an guide here:
 
==== Basic Setup ====
# Create a new track (CTRL + t) "Track" > "Insert new track"
# To be able to adress all 8 channels of the mobile lab, change the track channel count to 8 channels via "Route" > "Track channels"
# Now we add a plugin called "ReaSurround" on your newly created channel. "ReaSurround" will enable us to route the sound via a graphic interface to the respective channels in realtime
# Before we can start routing we should adapt the speaker configuration fitting the speaker layout of the Mobile Lab. There is a ready made preset you can find here: Then import "8chReadSurround.rpl" preset library into the Plugin, this will already setup a good speaker configuration to work with the  Mobile Lab
# We now also need to change the track channel count on our master track to handle 8 channels. We will use this master track to send our differently panned sound sources to the correct hardware outputs. Do this by clicking on the "Sends/Hardware Outputs" Section on your Master Track and add a new hardware output. You can find the output configuration inside this chart [[#Mixer Routing]]
# Now you are ready to go to route your sound to the speakers of the Mobile Lab using ReaSurround
==== Audio Routing with ReaSurround ====
 
# The interface of "ReaSurround" let's you visually move a sound source to different speakers. After you loadup the preset you will see a speaker configuration setup with 8 speakers (yellow) and a white dot which is your sound source. By clicking and dragging your soundsource you can move the sound to the respective speaker.
# Using "Diffusion" you can make your sound source bigger covering a lager area of speakers
==== Automation and Modulation ====
 
Reaper let's you automate any paramter inside of the software, as well as using modulator like LFOs to control plugin and software parameters.
To be able to create automation we have to enable the automation envelope of the corresponding track.
# Click "Trim" on the track
# Enable the parameters you want to automate by clicking "Arm" and "Visible"
# A new envelope should appear under the track, where you can draw in your automation
# Clicking on "Mod" opens a window where you can set LFOs or an audio signal as a modulation source
 
=== Open Sound Control ===
Reaper can be controlled via open sound control so you can control your reaper session via an OSC Controller (TouchOSC, PD, OSC Controller, MAX/MSP)  
 
{| class="wikitable" style="text-align:left"
|+ Table of OSC Messages
|-
|-
|ABH LV || -30° || 0°|| CH 29|| CH 13
! Parameter !! OSC Message !! Datatype
|-
|-
|ABH RV || 30° || 0°|| CH 30|| CH 14
| Track Volume || /track/@/volume || (float 0-1)
|-
|-
|ABH RH || 130 || 0°|| CH 27|| CH 11
| FX Parameter (ReaSurround X)  || /track/@/fx/1/fxparam/6/value || (float 0-1)
|-
|-
|ABH LH || -130° || 0°|| CH 28|| CH 12
| FX Parameter (ReaSurround Y)  || /track/@/fx/1/fxparam/7/value || (float 0-1)
|-
|-
| FX Parameter (ReaSurround Diffusion)  || /track/@/fx/1/fxparam/10/value || (float 0-1)
|}
|}
=== Controlling Reaper with an IPad ===
AESR provides a [https://hexler.net/touchosc Touch OSC] [https://base.uni-ak.ac.at/cloud/index.php/s/D45xTnL8YErnQAf template] that can already setup  to control the AESR Mobile Lab Reaper Template via  OSC. This template enables you to route 8 channels of audio to different speakers of the Mobile Lab in realtime. 
<span id="preliminary-steps"></span>
==== Preliminary Steps ====
# Log into  IPad (Code: 2468)
# Start Touch OSC
# Make sure that the computer and the Ipad are on the same network
[[File: Open-touchosc.png| 400px]]
===== Get the IP Adress of your computer: =====
# Windows:
## . Open the Command Line ([Windows] + [R] enter “cmd”)
## Enter <code>ipconfig</code>
## Note IP-Adress under the network interface that you are using to connect to the network
# Mac OS:
## Press “Alt” and right-click on the Wifi Symbol
## You should see your IP-Adress inside the context menu
# Linux:
## Enter the commandline and type: <code>ip a</code>
## Note IP-Adress under the network interface that you are using to connect to the network
<span id="edit-touch-osc-settings"></span>
==== Edit Touch OSC Settings ====
# Switch to Editing Mode
# Switch to Connections Tab
# Go to OSC Settings Tab
# Enter IP-Adress of host (your computer)
# Choose a send port, that is not in use by another software (eg. 1234, 7777, 8888, 2562)
# Set port in Reaper via Options > Preferences > Control/OSC/Web
# Add Control Surface > Control Surface Mode: OSC (Open Sound Control)
# Chose Mode "Local Port"
# Set port to port number set in TouchOSC Settings
<span id="touch-osc-template-overview"></span>
<gallery widths=500 heights=400>
File:Touchosc settings.png|1. Editing Mode
File:Touchosc connections.png|2. Connections Editor
File:Touchosc connections-edit.png| 3., 4., & 5. Settings for Host-IP, Protocol and Port
File: Osc-settings.png| Reaper Settings (Steps 6,7,8,9)
</gallery>
==== Touch OSC Template Overview ====
[[File:Touchosc-overview.png| 500px]]
# Selection of one of eight tracks
# X/Y Routing Position of currently selected track
# Track volume
# Track Diffusion (perceived Size of sound)
# Master Volume
# Mute Master
=== Ableton Live ===
[[File: Live-Surround.png|1000px]]
The AESR Lab provides a ready made Live-Template that can pan 8 sound sources to any speaker attached to the mobile lab. You can find it [https://base.uni-ak.ac.at/cloud/index.php/s/oSj5Hcedy2krakN here].
If you are looking for a way create your own multichannel routing template, or modify the existing one, we have created an guide here.
Please notice that Live has no native multichannel support and needs M4L to enable multichannel.
[[File: SurroundPanner.png]]
==== Setup ====
# To be able to utilize multichannel routing you will need a M4L external called "Surround Panner". You can find it [https://www.ableton.com/de/packs/surround-panner/ here] or in our [https://base.uni-ak.ac.at/cloud/index.php/s/8gpPFCtM7gq2L6t Resources Folder]
# Put onto a track you want to use for multichannel output
# Select "Speaker Setup" "8-Center"
# Select Outputs "1/2 > Ext.Out > 1/2, 3/4 > Ext.Out > 3/4, etc"
# Add "Surround Panner" to more tracks if you need to
# Use the graphical interface to move the sound around, you can use the focus parameter to expand the speaker range of the sound source or to make it smaller

Latest revision as of 16:17, 22 December 2025

Overview

Mobile sound laboratory for field research with a focus on experimental work in the field of sound art. The mobile lab is a research unit designed as a vehicle trailer (the size of a caravan) and includes a variety of sound projection and recording capabilities, processing station, and sound system. The Mobile Lab can output sound on up to 12 channels.

Equipment

  • Yamaha TF1 digital mixingconsole
  • 8x JBL Control 28-L1 Outdoor Speakers
  • Audinate Dante AVIO USB to Dante Adapter
  • 4x Neumann KH 150 Studiomonitors
  • 3x DAP Audio QI-4400 4 Channel Amplifier
  • 2x DLINK DGS-1210-28 Smart Managed Switch

Dimensions

  • Length (total):7890 mm
  • Length (without drawbar): 6260 mm
  • Drawbar: 1630 mm
  • Width: 2550 mm
  • Height: 3055 mm
  • Weight: 3200 kg

Ressources

Mixer Routing

The mixer can either be accesed via USB (32 channel plug-and-play) or via Dante. Dante requires a compatible soundcard or Dante Virtual Soundcard(we can provide a shareable license). AUX Channels are used in the mixing console to route the audio to the corresponding physical outputs. You can see the output routing on the following channel list.

USB Mixer Routing
ASF Channel Name Output
ABH LH AUX 13 Omni 11 / MPO 11
ABH RH AUX 14 Omni 12 / MPO 12
ABH LV Stereo ST L Omni 13 / MPO 13
ABH RV Stereo ST R Omni 14 / MPO 14
PA 1 AUX 1 Omni 1 / MPO 1
PA 2 AUX 2 Omni 2 / MPO 2
PA 3 AUX 3 Omni 3 / MPO 3
PA 4 AUX 4 Omni 4 / MPO 4
PA 5 AUX 5 Omni 5 / MPO 5
PA 6 AUX 6 Omni 6 / MPO 6
PA 7 AUX 7 Omni 7 / MPO 7
PA 8 AUX 8 Omni 8 / MPO 8
PAA AUX 9 Omni 9 / MPO 9
PAB AUX 10 Omni 10 / MPO 10
PAL AUX 11 Omni 15 / MPO 15
PAR AUX 12 Omni 16 / MPO 16

Speaker Setup Innen

Basic Ambisonic Template for 4 channel mixing can be found here:

Load Preset A05 - AESR Rec for 4 channel mixdowns

Speaker Setup Inside
Lautsprecher Azimuth Azimuth Elevation Output
ABH LV -30° 0° Omni 13
ABH RV 30° 0° Omni 14
ABH RH 130 0° Omni 11
ABH LH -130° 0° Omni 12

Working with the Mobile Lab

The center piece for routing sound inside the Mobile Lab is a Yamaha TF1 digital mixing console. Different presets are already prepared for different routing options for different scenarios including:

  • Multichannel Output
  • Quadrophonic Mixdowns
  • Recording

Depending on the preset routing will be different and you actually dont need to further interact with the mixing console beside loading the corresponding preset. See the channel list of each preset where you need to sound audio to get output.

Presets

Presets can be loaded from the Scenes Menu on the TF1 in the top left corner

AESR USB|Dante:

  • Channel 1 - 12 USB
  • Channels 17-28 Dante
  • DCA 1 acts like a masterfader for all USB & Dante channels
  • Purpose: Multichannel Routing
  • All USB channel are also sent to ABH LV/RV. Note that everything will be presented in mono
Input Mixer Channel Channel Name Output ASF DCA Group
USB 1 Ch 1 PA1(USB) Omni 1/MPO 1 PA1 DCA 1
USB 2 Ch 2 PA2(USB) Omni 2/MPO 2 PA2 DCA 1
USB 3 Ch 3 PA3(USB) Omni 3/MPO 3 PA3 DCA 1
USB 4 Ch 4 PA4(USB) Omni 4/MPO 4 PA4 DCA 1
USB 5 Ch 5 PA5(USB) Omni 5/MPO 5 PA5 DCA 1
USB 6 Ch 6 PA6(USB) Omni 6/MPO 6 PA6 DCA 1
USB 7 Ch 7 PA7(USB) Omni 7/MPO 7 PA7 DCA 1
USB 8 Ch 8 PA8(USB) Omni 8/MPO 8 PA8 DCA 1
USB 9 Ch 9 PAA(USB) Omni 9/MPO 9 PAA DCA 1
USB 10 Ch 10 PAB(USB) Omni 10/MPO 10 PAB DCA 1
USB 11 Ch 11 PAL(USB) Omni 11/MPO 11 PAL DCA 1
USB 12 Ch 12 PAR(USB) Omni 12/MPO 12 PAR DCA 1
Dante 17 Ch 17 PA1(DA) Omni 1/MPO 1 PA1 DCA 1
Dante 18 Ch 18 PA2(DA) Omni 2/MPO 2 PA2 DCA 1
Dante 19 Ch 19 PA3(DA) Omni 3/MPO 3 PA3 DCA 1
Dante 20 Ch 20 PA4(DA) Omni 4/MPO 4 PA4 DCA 1
Dante 21 Ch 21 PA5(DA) Omni 5/MPO 5 PA5 DCA 1
Dante 22 Ch 22 PA6(DA) Omni 6/MPO 6 PA6 DCA 1
Dante 23 Ch 23 PA7(DA) Omni 7/MPO 7 PA7 DCA 1
Dante 24 Ch 24 PA8(DA) Omni 8/MPO 8 PA8 DCA 1
Dante 25 Ch 25 PAA(DA) Omni 9/MPO 9 PAA DCA 1
Dante 26 Ch 26 PAB(DA) Omni 10/MPO 10 PAB DCA 1
Dante 27 Ch 27 PAL(DA) Omni 11/MPO 11 PAL DCA 1
Dante 28 Ch 28 PAR(DA) Omni 12/MPO 12 PAR DCA 1

AESR Dante|USB

  • Same as above but Dante Channels are switched around from: Dante 1-12, USB 17-28 #### AESR USB|Analog
  • Setup for using analog inputs for routing, suitable for setup using other soundcards than the TF1
  • Channels 1-12 USB In
  • Channels 17-28 Analog Ins (AN 1-12)
Input Mixer Channel Channel Name Output ASF DCA Group
USB 1 Ch 1 PA1(USB) Omni 1/MPO 1 PA1 DCA 1
USB 2 Ch 2 PA2(USB) Omni 2/MPO 2 PA2 DCA 1
USB 3 Ch 3 PA3(USB) Omni 3/MPO 3 PA3 DCA 1
USB 4 Ch 4 PA4(USB) Omni 4/MPO 4 PA4 DCA 1
USB 5 Ch 5 PA5(USB) Omni 5/MPO 5 PA5 DCA 1
USB 6 Ch 6 PA6(USB) Omni 6/MPO 6 PA6 DCA 1
USB 7 Ch 7 PA7(USB) Omni 7/MPO 7 PA7 DCA 1
USB 8 Ch 8 PA8(USB) Omni 8/MPO 8 PA8 DCA 1
USB 9 Ch 9 PAA(USB) Omni 9/MPO 9 PAA DCA 1
USB 10 Ch 10 PAB(USB) Omni 10/MPO 10 PAB DCA 1
USB 11 Ch 11 PAL(USB) Omni 11/MPO 11 PAL DCA 1
USB 12 Ch 12 PAR(USB) Omni 12/MPO 12 PAR DCA 1
Analog 1 Ch 17 PA1(AN) Omni 1/MPO 1 PA1 DCA 1
Analog 2 Ch 18 PA2(AN) Omni 2/MPO 2 PA2 DCA 1
Analog 3 Ch 19 PA3(AN) Omni 3/MPO 3 PA3 DCA 1
Analog 4 Ch 20 PA4(AN) Omni 4/MPO 4 PA4 DCA 1
Analog 5 Ch 21 PA5(AN) Omni 5/MPO 5 PA5 DCA 1
Analog 6 Ch 22 PA6(AN) Omni 6/MPO 6 PA6 DCA 1
Analog 7 Ch 23 PA7(AN) Omni 7/MPO 7 PA7 DCA 1
Analog 8 Ch 24 PA8(AN) Omni 8/MPO 8 PA8 DCA 1
Analog 9 Ch 25 PAA(AN) Omni 9/MPO 9 PAA DCA 1
Analog 10 Ch 26 PAB(AN) Omni 10/MPO 10 PAB DCA 1
Analog 11 Ch 27 PAL(AN) Omni 11/MPO 11 PAL DCA 1
Analog 12 Ch 28 PAR(AN) Omni 12/MPO 12 PAR DCA 1

AESR Rec

  • For recording and 4 channel monitoring
  • DCA 1 Computer Monitor
  • DCA 2 Input Monitoring
  • Direct Input Monitoring
  • Recording Inputs will be available Starting at Channel 17 (Analog In = USB 17 In)
Input Mixer Channel Channel Name Output ASF DCA Group
USB 1 Ch 1 PC L Omni 13MPO 13 ABH LV DCA 1
USB 2 Ch 2 PC R Omni 14/MPO 14 ABH RV DCA 1
USB 3 Ch 3 PC LH Omni 11/MPO 11 ABH LH DCA 1
USB 4 Ch 4 PC RH Omni 12/MPO 12 ABH RH DCA 1


Reaper

The AESR Lab provides a ready made Reaper-Template that can pan 8 soundsources to any speaker attached to the mobile lab. You can find it here.

If you are looking for a way create your own multichannel routing template, or modify the existing one, we have created an guide here:

Basic Setup

  1. Create a new track (CTRL + t) "Track" > "Insert new track"
  2. To be able to adress all 8 channels of the mobile lab, change the track channel count to 8 channels via "Route" > "Track channels"
  3. Now we add a plugin called "ReaSurround" on your newly created channel. "ReaSurround" will enable us to route the sound via a graphic interface to the respective channels in realtime
  4. Before we can start routing we should adapt the speaker configuration fitting the speaker layout of the Mobile Lab. There is a ready made preset you can find here: Then import "8chReadSurround.rpl" preset library into the Plugin, this will already setup a good speaker configuration to work with the Mobile Lab
  5. We now also need to change the track channel count on our master track to handle 8 channels. We will use this master track to send our differently panned sound sources to the correct hardware outputs. Do this by clicking on the "Sends/Hardware Outputs" Section on your Master Track and add a new hardware output. You can find the output configuration inside this chart #Mixer Routing
  6. Now you are ready to go to route your sound to the speakers of the Mobile Lab using ReaSurround

Audio Routing with ReaSurround

  1. The interface of "ReaSurround" let's you visually move a sound source to different speakers. After you loadup the preset you will see a speaker configuration setup with 8 speakers (yellow) and a white dot which is your sound source. By clicking and dragging your soundsource you can move the sound to the respective speaker.
  2. Using "Diffusion" you can make your sound source bigger covering a lager area of speakers

Automation and Modulation

Reaper let's you automate any paramter inside of the software, as well as using modulator like LFOs to control plugin and software parameters. To be able to create automation we have to enable the automation envelope of the corresponding track.

  1. Click "Trim" on the track
  2. Enable the parameters you want to automate by clicking "Arm" and "Visible"
  3. A new envelope should appear under the track, where you can draw in your automation
  4. Clicking on "Mod" opens a window where you can set LFOs or an audio signal as a modulation source

Open Sound Control

Reaper can be controlled via open sound control so you can control your reaper session via an OSC Controller (TouchOSC, PD, OSC Controller, MAX/MSP)

Table of OSC Messages
Parameter OSC Message Datatype
Track Volume /track/@/volume (float 0-1)
FX Parameter (ReaSurround X) /track/@/fx/1/fxparam/6/value (float 0-1)
FX Parameter (ReaSurround Y) /track/@/fx/1/fxparam/7/value (float 0-1)
FX Parameter (ReaSurround Diffusion) /track/@/fx/1/fxparam/10/value (float 0-1)

Controlling Reaper with an IPad

AESR provides a Touch OSC template that can already setup to control the AESR Mobile Lab Reaper Template via OSC. This template enables you to route 8 channels of audio to different speakers of the Mobile Lab in realtime.

Preliminary Steps

  1. Log into IPad (Code: 2468)
  2. Start Touch OSC
  3. Make sure that the computer and the Ipad are on the same network

Get the IP Adress of your computer:
  1. Windows:
    1. . Open the Command Line ([Windows] + [R] enter “cmd”)
    2. Enter ipconfig
    3. Note IP-Adress under the network interface that you are using to connect to the network
  2. Mac OS:
    1. Press “Alt” and right-click on the Wifi Symbol
    2. You should see your IP-Adress inside the context menu
  3. Linux:
    1. Enter the commandline and type: ip a
    2. Note IP-Adress under the network interface that you are using to connect to the network

Edit Touch OSC Settings

  1. Switch to Editing Mode
  2. Switch to Connections Tab
  3. Go to OSC Settings Tab
  4. Enter IP-Adress of host (your computer)
  5. Choose a send port, that is not in use by another software (eg. 1234, 7777, 8888, 2562)
  6. Set port in Reaper via Options > Preferences > Control/OSC/Web
  7. Add Control Surface > Control Surface Mode: OSC (Open Sound Control)
  8. Chose Mode "Local Port"
  9. Set port to port number set in TouchOSC Settings

  • 1. Editing Mode
    1. Editing Mode
  • 2. Connections Editor
    2. Connections Editor
  • 3., 4., & 5. Settings for Host-IP, Protocol and Port
    3., 4., & 5. Settings for Host-IP, Protocol and Port
  • Reaper Settings (Steps 6,7,8,9)
    Reaper Settings (Steps 6,7,8,9)

Touch OSC Template Overview

  1. Selection of one of eight tracks
  2. X/Y Routing Position of currently selected track
  3. Track volume
  4. Track Diffusion (perceived Size of sound)
  5. Master Volume
  6. Mute Master

Ableton Live

The AESR Lab provides a ready made Live-Template that can pan 8 sound sources to any speaker attached to the mobile lab. You can find it here.

If you are looking for a way create your own multichannel routing template, or modify the existing one, we have created an guide here. Please notice that Live has no native multichannel support and needs M4L to enable multichannel.

Setup

  1. To be able to utilize multichannel routing you will need a M4L external called "Surround Panner". You can find it here or in our Resources Folder
  2. Put onto a track you want to use for multichannel output
  3. Select "Speaker Setup" "8-Center"
  4. Select Outputs "1/2 > Ext.Out > 1/2, 3/4 > Ext.Out > 3/4, etc"
  5. Add "Surround Panner" to more tracks if you need to
  6. Use the graphical interface to move the sound around, you can use the focus parameter to expand the speaker range of the sound source or to make it smaller
Retrieved from "https://aesr-docs.uni-ak.ac.at/index.php?title=Mobile_Lab&oldid=222"